[agent] folex Underpacking Foils Folabase H-45 (Swiss)

1. self-adhesive for plate cylinder 2. for a hard substrate packing 3. ideal properties on almost all cylinder surface

Features:

Good support for corrections in the cylinder circumference of forme-cylinder and blanket-cylinder Changing the printing lengthPolyester film with adhesive light (silicon coating) on one sidePaper jam-resistant, crease-resistantSelf-healing and repositionalbleUniform thickness and hardness

Thickness:

0.04mm	0.08mm	0.10mm	0.12mm	0.14mm	0.16mm
0.18mm	0.20mm	0.23mm	0.25mm	0.28mm	0.30mm
0.35mm	0.40mm	0.45mm	0.50mm	0.55mm	0.60mm

Application:

Cleaning the cylinders totally with a wet sponge and washing like alcoholIf cylinders have a corrosive surface, there could be space where solvents can flow beneath the underlay foil. In this case the adhesion of the foil over a long time can't be guaranteed.Putting the sticky side of the foil to the lead edge of the cylinder in a parallel way and pressing it down softlyRemoving and repsitioning the foil to correct place because of the low adhesive at the beginning of contactSmoothing out with a dry, fluffy-free cloth from the middle to bothe sidesSpecial micro groove structure of the adhesive will help to transfer the air bubbles to the sides and will disappear after a few rotations of the cylinder.Removing the foil slowly diagonally flat to the bottom while the cylinder is still warm after 8-10 months of useAfter longer period of use the adhesion increases and the remove will be very hard.

[agent] folex Underpacking Foils Folabase H-45 (Swiss)